Delivers bold, glossy color with minimal transfer and up to 16 hours of comfortable wear.
NYX Shine Loud High Shine Lip Color pairs a bold pigment base with a glassy top coat for glossy, transfer-resistant color. Here is how it actually wears, who will love it, and how to get the best results.
NYX Shine Loud High Shine Lip Color went viral by promising something that seemed impossible at the time: a high-shine lip that does not smudge or transfer once it sets. After weeks of daily wear tests that included hot coffee, long commutes, and meals with both salads and greasy fries, this is a clear picture of what it gets right, where it struggles, and how to make it look its best on real lips.
Overview
Shine Loud is a dual-ended lip color. One end holds a thin, highly pigmented liquid that dries down to a flexible film. The other end holds a crystal-clear top coat that adds a glassy finish and helps lock in moisture and shine. The brand claims up to 16 hours of wear with minimal transfer once the color sets.
The tube is slim and easy to carry. Each end has a precise applicator that helps you trace your lip line and reach the corners without overapplying. The pigment side goes on in a thin layer and dries quickly. The top coat feels like a lightweight gel-gloss. Together they deliver a lacquered, mirror-like shine that looks more like a glossed lipstick than a matte liquid lip.
Shade range is broad, with nudes, pinks, berries, and statement reds. Coverage is opaque in one thin coat for most shades. Deeper tones can look especially dramatic, while the lighter beiges and pinks are office friendly. There is no strong fragrance once applied. You may notice a brief cosmetic scent from the base coat that fades as it dries.
Who it’s for
Choose Shine Loud if you want bold, glossy color that stays put on cups, hoodie collars, and shirt shoulders. It works well for long workdays, mask-on commutes, events, and nights out where you do not want to keep checking for smudges. If you love the look of vinyl shine but hate the sticky feel and constant transfer that usually come with gloss, this formula is designed for you.
You may want to skip it if your lips are very dry or peeling, or if you prefer low-maintenance balm-like color. The pigment layer is thin and long wearing, which means it can emphasize flakes if you do not prep. It also requires a specific application technique and a bit of patience during the dry time. If you want to swipe and go without waiting, a standard creamy lipstick or tinted balm will be easier.
How it feels and performs
The base coat feels lightweight and a bit fluid, not creamy. It glides on, then begins to set in under a minute. During the set time your lips will feel slightly tacky. Do not press them together yet. Once set, the film feels thin and flexible, more like a stain-meets-liquid-lip rather than a classic matte. The top coat changes the experience in two key ways. First, it adds an instant glassy finish. Second, it boosts comfort by softening the feel of that set film.
Transfer resistance is where Shine Loud shines. After the base sets and the top coat is applied, there is little to no transfer to cups or the back of your hand. That no-transfer claim holds up with coffee sips, water bottles, and light snacking. Oily foods are the exception. Oils break down long-wear films, and you will notice fading or a soft edge at the inner rim after pizza, fries, or salad dressing. This is typical of most long-wear lip formulas.
Comfort depends on keeping the top coat on. With the gloss intact, the lips feel cushy and smooth. As the gloss wears down, the base layer starts to feel a bit tight or dry. If you let the gloss fully wear off and keep talking or pressing your lips together, the film can lightly stick to itself. A quick recoat of the clear gloss fixes the feel and look instantly. On busy days, plan to reapply the top coat every few hours, the same way you would refresh any gloss.
Longevity is strong compared to regular lipsticks and glosses. In our tests, color stayed crisp for six to eight hours with coffee and water, then showed predictable inner fade after an oily lunch. Lighter and mid-tone shades look forgiving as they fade. Deep reds and berries look most pristine when you avoid overapplying and resist the urge to add multiple color layers. If you do need to reapply the color, remove what is left with an oil-based remover first, then start fresh. Stacking the pigment on top of old pigment can lead to crumbling or a gummy feel.
Finish is a true high shine, almost wet-looking at first. It settles into a glassy sheen within minutes. It never becomes glass-hard or lacquer-thick, so lips still look dimensional rather than coated in a shell. On camera, the shine reads beautifully without highlighting texture. In person, friends may ask what glossy lipstick you are wearing, because the effect is closer to a glossed lipstick than a matte liquid lip with a clear layer.
Texture and color evenness vary slightly by shade family. Nudes and pinks are very smooth. Deeper berries and vampy tones may show minor streaking if you try to build too much in one go. The fix is simple. Apply one extremely thin coat, let it set, then tap a second very thin coat only where needed before adding the gloss. Resist the temptation to swipe on a thick layer.
How to use for best results
Prep makes the biggest difference with Shine Loud, because the base coat is long wearing and semi-flexible. Follow this routine for smooth, even results that last:
1) Exfoliate gently. Use a soft washcloth or a mild lip scrub to lift flakes, then rinse. 2) Hydrate lightly. Apply a thin layer of lip balm and let it sink in for 5 minutes. Blot off any excess. Too much balm will thin the pigment and cause patchiness. 3) Outline first if you want extra crisp edges. A clear or shade-matched lip liner helps prevent feathering on highly textured lips. 4) Apply a very thin layer of the pigment. Wipe excess from the applicator and use slow, precise strokes. Do not press your lips together. 5) Let it set fully. Give it at least 90 seconds to 2 minutes. You are ready to top coat when it feels dry and slightly tacky, not wet. 6) Add a light layer of the clear top coat. Start at the center and sweep outward. One to two passes are enough. 7) Refresh the top coat as needed. Keep it with you and add a quick layer every few hours to keep the shine going and the base comfortable. 8) For reapplication of color, remove first. Use an oil-based remover or a cleansing balm, massage gently, then wipe away before starting over.
Pro tips: For deep or bright shades, map the cupid’s bow with the very tip of the applicator, then fill in. If you make a mistake, do not smear it. Use a pointed cotton swab with a drop of micellar water to clean the edge, then dry the area before reapplying. If the inner rim fades after lunch, try refreshing only the top coat first. If color looks uneven after an oily meal, remove and reapply the base coat on just the inner section, let it set, then gloss the whole lip.
Pros and cons
Pros
- Truly low transfer once set, even with a glossy finish
- High shine that lasts longer than standard gloss
- Lightweight, flexible feel when the top coat is maintained
- Bold pigment with a wide range of wearable nudes and statement shades
- Budget friendly for the performance
Cons
- Base layer feels dry if you let the top coat wear off completely
- Reapplying color on top of old color can lead to crumbling, removal is best
- Deep shades are less forgiving if you overapply or skip full dry time
- Oily foods cause inner fade that may require a quick fix
Final verdict
NYX Shine Loud High Shine Lip Color delivers on its main promise. You get a glossy look with very little transfer, which is rare. It is not a swipe-and-go balm and it does not love shortcuts. It wants thin layers, full dry time, and a refreshed top coat every few hours. Treat it that way and you will get a vibrant lip that still looks polished at 5 p.m.
If your lips are prone to dryness or you prefer cushiony balms, keep this for special occasions or choose one of the softer shades. If you have been searching for a budget-friendly alternative to expensive vinyl-look lip lacquers, Shine Loud is an easy recommendation. It balances longevity with shine better than most options in its price bracket, and once you dial in the technique, it is a dependable, camera-ready lip that resists smudges without looking flat.
See also
If you love glossy comfort but want options that feel more balmy right from the start, you might enjoy our take on juicy oils and gels in the Best Non-Sticky Lip Glosses guide, or see how a luxury oil stacks up in our Dior Lip Glow Oil Review.
To keep the rest of your makeup as fresh as your lips, pair long-wear color with hydrated coverage like the NYX Bare With Me Concealer Serum, then lock in your base with a mist such as the Charlotte Tilbury Airbrush Flawless Setting Spray or a classic powder like bareMinerals Mineral Veil.
FAQ
Does NYX Shine Loud High Shine Lip Color actually not transfer?
Once the base coat is fully dry and the clear top coat is applied, transfer is very minimal. You should not see color on coffee cups or your hand. The top coat itself can leave a faint gloss mark, but the pigment stays put. Give the base at least 90 seconds to 2 minutes to set before adding the gloss for the best result.
How long does it really last during a typical day?
Expect 6 to 8 hours of strong wear with water and non-oily foods. The inner rim tends to fade after oily meals because oils break down long-wear films. A quick refresh with the clear top coat often revives the look. If color looks patchy after a heavy, oily meal, remove the inner section and reapply a thin layer of the base before glossing again.
Is it drying, and what can I do if my lips are sensitive?
The base can feel tight if you let the gloss wear off. Prep helps a lot. Gently exfoliate, apply a thin layer of balm, blot, and then apply Shine Loud in thin coats. Keep the clear top coat with you and reapply it every few hours. If your lips are very dry, choose a mid-tone nude or pink rather than a deep shade, which tends to emphasize texture more.
Can I layer the color during the day or should I remove it?
You can layer a second very thin coat right after the first, before applying gloss, if you need extra coverage. During the day, if the color has worn unevenly, it is better to remove with an oil-based remover and start fresh. Layering the pigment on top of set pigment can cause crumbling or a gummy feel.
Which shades are most forgiving and easiest to wear?
Light to mid-tone nudes, rosy pinks, and soft berries are the most forgiving as they fade and are less likely to highlight texture. Deep reds and vampy tones look striking but require the thinnest possible application and full dry time for a smooth result.
As an Amazon Associate, we earn from qualifying purchases made through links on our site.